Building a Substructure with a Groovy Platform
So, you got a Groovy Platform. Now what?
Our platforms must be installed on a level surface, as the tongues need to fit into their grooves for both functional and structural reasons. If the surface is not level, the platform cannot click together.
Having a levelled substructure is the best way to optimize the functionality of our platforms.
To avoid the accumulation of standing water and favor ventilation, your substructure should be at least 10” off the ground.
Since our platforms are structural, a simplified freestanding deck sitting at a minimum of 10" of the ground is optimal. For plans click here.
We recommend installing our platforms right on the deck without deck boards for increased air flow and drainage.
It's also nicer on your wallet, as you use significantly less lumber in this scenario.
Related Articles
Groovy Platforms
Why Buy A Groovy Platform? Our SIP panels are assembled with a simple tongue and groove system. This makes the entire platform easy to assemble and transport. SIPs are also structurally strong, rigid, and durable despite being made of relatively ...DIY Insulated Platforms
Making Your Own Insulated Platform When considering a floor for your yurt, you may want to use our insulated platform technique. When building your platform, we recommend sandwiching Styrofoam between two sheets of plywood. This method has been ...DIY Square Substructures
The easiest way to construct a square substructure is to build a free-standing deck spaced 12" or 16" off-center. This will provide ample strength and rigidity for the yurt. The spacing and size of your beams, joists, and braces will directly affect ...DIY Alternative Straw Bale Platforms
We encourage those working with natural materials to do their research. We are not experts in earthen building but encourage the use of natural materials in constructing your platforms and substructures. The most popular natural material we see used ...DIY Rim Boards
Calculating Your Rim Boards Once you have finished constructing your substructure and platform, you must install a rim board around the circumference of your platform before raising your yurt. We find that 3/8" thick plywood works great as it is ...